Flexxifinger® Triple S™ Series
Triple S™ series fits all systems that have a guard finger in front of the knife because of a universal-fit rail that attaches to the header. The unique eyestrap method of attaching the lifter’s arm and riser to the rail creates a highly adjustable product that can be angled to suit your header or crop type and will allow the lifters to be configured on the header to work in unison. As with all Flexxifinger crop lifters, the Triple S™ crop lifters use our patented QD™ attaching and detaching technology and can be removed and or installed in 3 – 5 minutes per header, after the initial installation.
The Triple S™ European Lifters (patent pending), are designed to harvest taller, heavier crops that are lying on the ground due to weather or insect damage. This lifter can leave 70mm – 100mm (3” – 4”) stubble. The Triple S™ European™ can get under the crop canopy of low lying crop and lift the crop above the knife to increase recovery.
Benefits
Usage
Crop type: cereals, oilseed, forage and other specialty crops
Generally, the recommended spacing is one lifter per foot across the header. Harvesting some row or bedded crops, where lifters mounted to the row or a combination of different Flexxifinger® lifters to maximize recovery have proven beneficial.
** Some or all of these components are made of steel, therefore care must be exercised by the combine operator to minimize possible damage to the header/ combine.**
70400 Triple S™ European™ Crop Lifter
- Most efficient for taller heavier crops lying on the ground
- This lifter can leave 75mm – 100mm (3” – 4”) stubble
- Adjustable within a range of 40 degrees
- Nut Assembly included**
** Additional carriage bolt 32310, 32312 or 32314 may be required for specific model headers. Please contact our Product Support team for more details.
